• Precision Measurement Technologies
  • Technology Center for

AS8506C Battery Stack Monitor/Balancer

Cell Monitor and Cell Balancer IC

The AS8506C features simultaneous cell voltage comparison with upper and lower threshold, active- or optionally passive cell balancing by simultaneous comparison of actual cell voltages with a target cell voltage. Cells which are below target will either cyclically receive charge packages from an isolated DCDC converter or, optionally, cells above target will cyclically be discharged by an external ­resistor through integrated switches in an autonomous way. The AS8506C targets non-automotive markets with an optimized cost structure.

Block diagram of the AS8506C Battery Stack Monitor/Balancer

Key Features

  • Simultaneous cell voltage capture for balancing and SOA monitoring
  • Autonomous balancing and SOA monitoring strongly reduces data communication and data processing and thereby improves EMC robustness
  • Active charge balancing with very few external components for good efficiency and little heat dissipation.
  • Absolute cell voltage readout for OCV capture and cell impedance calculation. Readout of 2 temperature sensors

Key Benefits

  • Recover capacity loss of batteries, increase operating time, as well as improve overall system run time.
  • Tremendously reduced communication saving costs in the system and makeing the system more reliable
  • Active balancing is possible as an as an energy efficient option

AS8506C Applications

The AS8506C Battery Stack Monitor/Balancer is ideal for all LI based cell packs as well as EDLC's (Electrical Double Layer Capacitors or Supercapactors) in the following applications:

  • Mobility (like in 12V, 48V, high voltage BMS applications e.g. BEV, HEV, motorcycles, E-scooters, E-Bicycles, E-Kart)
  • Consumer Electronics like Powertools (e.g. drill machines)
  • Off/On-grid energy storage (e.g. photo voltaic / wind energy)

AS8506C Product Facts

Typical standby quiescent current [μA] 17
Balancing current [mA] typically 100
Temperature range [°C] -40 to +85
Number of cells per IC 3-7
Cell voltage range [V] 1.8 - 4.5
Package MLF-40 (6x6)